T-Comfort 930 DSL, User Manual

Page: 31 / 152

29
Available Ports Installation
■
One slot to incorporate a V.24 module. The following port can be used with the V.24 module:
one COM port to connect to a PC to configure and transmit connection data, designed as an RJ45 jack
■
One port to the LAN (10BaseT), designed as an RJ45 jack
■
One CompactFlash socket to incorporate a type I or type II CompactFlash memory card. These cards are
necessary to operate the internal answering machine. Only use high speed memory cards acquired with
the license. Other memory cards or “Microdrive” type memory cards may not be able to maintain the
required access speed.
■
One port jack to connect the plug-in power supply to power the basic module. Only use the original
T-Comfort 930 DSL plug-in power supply provided in the supply scope to power the basic module.
T-Comfort 930 DSL Version 2
The listed interfaces and ports are located on the basic module of the T-Comfort 930 DSL Version 1. Further
interfaces and ports can be added by installing the expansion set and additional interface cards (see
Installing an Expansion Set starting on page 22 and Installing Interface Cards starting on page 25).
■
One S
0
port to connect to an external S
0
bus (usually the NTBA), designed as an RJ45 jack (S
0
1)
■
One switchable S
0
port (S
0
2), which can be connected as either an internal or external S
0
bus. The
internal connection is via a pressure terminal and the external connection via an RJ45 jack.
■
Three U
pn
ports, designed as pressure terminals (U
pn
1 to U
pn
3)
■
Four analogue a/b ports, designed as pressure terminals (a/b1 to a/b4)
■
One CompactFlash socket to incorporate a type I or type II CompactFlash memory card. These cards are
necessary to operate the internal answering machine. Only use high speed memory cards acquired with
the license. Other memory cards or “Microdrive” type memory cards may not be able to maintain the
required access speed.
■
One port jack to connect the plug-in power supply to power the basic module. Only use the original
T-Comfort 930 DSL plug-in power supply provided in the supply scope to power the basic module.