T-Comfort 930 DSL, User Manual

Page: 56 / 152

54
Configuration Brief Guide to Initial Configuration
N
Note: To avoid problems with existing network installations, the T-Comfort 930 DSL’s
DHCP server is designed for static address assignment in its factory settings. The
T-Comfort 930 DSL’s IP address is always168.99.254 in its factory settings.
Brief Guide to Initial Configuration
Setting up a first connection is quite simple with a standard Windows PC:
1. Connect the PC’s network card with one of the T-Comfort 930 DSL.’s LAN ports Use a cross-wired Eth-
ernet cable to do this.
2. Windows 2000/XP: log on as a user with “Administrator” rights.
3. You will find the IP settings in Windows 2000/XP under Start : Settings : Network connections : Local
Area Connection . Open the dialogue box Local Area Connection Properties , and then the dialogue box
Internet Protocol TC/IP Properties (see figure: Setting the IP address in Windows XP on page 55).
4. Note down the existing settings so that you can restore them after completing the initial configuration.
5. Change the IP Address to 192.168.99.253. Change the subnet mask to 255.255.255.0, confirm with OK
and Close .
6. Start a Web browser and in the address field enter “http://192.168.99.254/”.
The Web console’s log-on page will be displayed. Enter the user name “Administrator” without a password for
the initial configuration. To support your next configuration steps, you should activate the Assistant mode on
the entry page of the Configurator . Please also pay attention to the online help.