T-Comfort 930 DSL, User Manual

Page: 63 / 152

61
Configuring the T-Comfort 930 DSL Configuration
■
Telephone book entries
■
LCR tables
For further information, refer to the online help documentation under the topic SYS Configuration: Data
backup .
Receiving System Messages as E-Mail
Important events and errors are kept by the T-Comfort 930 DSL in an internal log book: the error store. To
inform or alert the system administrators, entries in the log book (system messages) can be sent via e-mail.
In order not to notified of every error, the administrator can define corresponding log filters (in the Configu-
rator , the LOG Configuration: LOG Filter menu). These filters define which errors (category, severity, number
per time interval) should be notified. The e-mails always include an internal event or error number, as well as
an explanation of the message. Further, extra parameters (such as the port number when a trunk line drops
out) are also provided.
The mail account for this service ( Account for LOG filter ) is configured in the Configurator ,
NET Configuration: E-Mail Access .
Loading SW Updates
New versions of the system and terminal software can be loaded to the system.
New software versions of the T-Comfort 930 DSL are loaded from the configuration PC, which accesses the
Configurator (see the SYS Configuration: Firmware menu). For information on connecting a configuration
PC, see Brief Guide to Initial Configuration on page 54.
The terminal software is part of the T-Comfort 930 DSL software and is automatically loaded into the ter-
minals via the T-Comfort 930 DSL.
N
Note: If you are operating an PBX cascade, new system software is automatically
transferred to the slave system from the master system.
For further information, refer to the online help documentation under the item SYS Configuration: Firmware .