Using the Command Line Interface (CLI)
SYSTIMAX® AirSPEED™ AP542
User Guide
140
Example 2. Display specific Commands
To show all commands that start with specified letters, enter one or more letters, then
?
with no space between letters
and
?
.
[
Device-Name]>
s?
Figure A-4
Result of “s?” CLI Command
Example 3. Display parameters for set and show
Example 3a allows shows every possible parameter for the set (or show) commands. Notice from Example 3a that the
list is very long. Example 3b shows how to display a subset of the parameters based on initial parameter letters.
Example 3a. Display every parameter that can be changed
[Device-Name]>
set ?
Figure A-5
Result of “set ?” CLI Command
Example 3b. Display parameters based on letter sequence
This example shows entries for parameters that start with the letter “i”. The more letters you enter, the fewer the results
returned. Notice that there is no space between the letters and the question mark.
[Device-Name]>
show ipa?
Figure A-6
Result of “show ipa?” CLI Command
[Device-Name]>
show iparp?
Figure A-7
Result of “show iparp?” CLI Command
[Device-Name]> s
show set search
[Device-Name]> set
autoconfigstatus
autoconfigfilename
autoconfigtftpaddr
bcastbeaconssid
bridgeagingtime
.
.
.
txpowercontrol
wifssidtbl
qos1dto1ptbl
qos1dtodscptbl
qosedcatbl
qospolicytbl
qosqapedcatbl
wdssectbl
vlanmgmtid
vlanstatus
wdstbl
wif
[Device-Name]> show ipa
ipaddr ipaddrtype iparp
iparpfltipaddr iparpfltstatus iparpfltsubmask
[Device-Name]> show iparp
iparp iparpfltipaddr iparpfltstatus
iparpfltsubmask