background image

Quick Start Guide

DE:

 Bedienungsanleitung - de.startech.com

FR:

 Guide de l'utilisateur - fr.startech.com

ES:

 Guía del usuario - es.startech.com

IT:

 Guida per l'uso - it.startech.com

NL:

 Gebruiksaanwijzing - nl.startech.com

PT:

 Guia do usuário - pt.startech.com

Manual Revision: 08/07/2014

For the most up-to-date information, please visit: www.startech.com

Packaging Contents

•  1 x In-Wall Access Point

•  1 x Faceplate

•  1 x Frame for Faceplate

•  2 x Screws

•  2 x Washers

•  1 x Quick Start Guide

•  1 x Instruction Manual CD

System Requirements

•  802.3af / at compatible PoE Switch

•  Cat 5e (or better) Ethernet cabling from PoE switch to the Access 

Point 

•  1 gang receptacle box

LED Indicators

Installation

AP300WN2X2W / AP300WN22WUE

300Mbps Wireless N PoE-Powered Wallplate Access Point 

*actual product may vary from photos

Front View

Rear View

Reset Procedure

Default Settings

To reset the unit to factory defaults, press and hold the AUX and 

Reset buttons simultaneously for 5 seconds and then release.

Default IP Address: 

10.59.1.200

Username / Password: 

admin / admin

1. 

Slide the Frame over the back of the AP and secure using the 

provided screws w/ washers.

Ethernet Connector

(transparent)

LAN Connector

AUX

Reset

Button

PoE Power / Data 

Connector

Ethernet Connector

(transparent)

LED

State

Description

PWR

Off

No power

Green

Unit powered on

SYS

Off

Remains off while the unit is initializing

Green

Initializing complete, system is ready to use

Green (Blinking)

During firmware upgrades, this system LED will blink

Link/

WAN

Off

No network connector

Green

10/100Mbps network connection established

Green (Blinking)

Indicates WAN activity

LAN

Off

No network connection

Green

10/100Mbps network connection established

Green (Blinking)

Indicates LAN activity

WLAN

Off

The Wireless is not ready

Green

Wireless connection established

Green (Blinking)

Indicates Wireless activity

Reviews: