Instrument Operating Manual
CyFlow® Cube 8 Rev-27_2015-07-02
Sysmex Partec GmbH
Am Flugplatz 13, 02828 Görlitz, Germany · Phone +49 3581 8746-0 · Fax +49 3581 8746-70 · [email protected] ·
www.sysmex-partec.com
29 / 43
6.4.3 Moving of regions within a histogram
Move the cursor into the region and keep the left mouse button pressed while moving the
position. Individual points of a region can be changed by approaching with the cursor to
the point and keep the left mouse button pressed during movement. Regions within a dot
plot can be changed in size by selecting the
region with the cursor and pressing the “Shift”
button during cursor movement
Each region can be selected with the right
mouse button for deletion.
6.4.4 Create a vertical or horizontal histogram splitter
To create a vertical or horizontal histogram splitter, please move the cursor into the
histogram and press the right mouse button. Select
“Built vertical splitter region
group”
/
“Built horizontal splitter region group”
to divide the histogram into two
sections (VS1-1 and VS1-2). The intersection can be modified by moving the cursor into
the plot and keeping the left mouse button pressed.
6.4.5 Create a quadrant assembly
To create a quadrant assembly within a dot plot, move the cursor into the dot plot and
press the right mouse button. Select
“Built cross region
group
”
to divide the dot plot
into four sections (CR1-1, CR1-2, CR1-3 and CR1-4). To change the quadrants move the
cursor into the dot plot and keep the left mouse button pressed. To create asymmetric
quadrants please approach individual points (at the border of the dot plot or at the
intersection point of the quadrants) with the left mouse button and keep the left mouse
button pressed.
