Instrument Operating Manual
CyFlow® Cube 8 Rev-27_2015-07-02
Sysmex Partec GmbH
Am Flugplatz 13, 02828 Görlitz, Germany · Phone +49 3581 8746-0 · Fax +49 3581 8746-70 · [email protected] ·
www.sysmex-partec.com
14 / 43
4.1
CyView
™ Instrument Setting Controls
Overview of instrument settings
4.1.1
1D/2D PLOTS
– display options
The
1D/2D Plots
register defines properties of the graphical plots. The basic layout in
terms of number of plots, type of plots (histograms, dot plots) and position of the plots is
defined in the used
Configuration File
.
As example: 12Pl
→
6 Hist 6 dot plots
Plots are named
H1
– Hx
for histograms and
P1
– Px
for dotplots. A specific plot is
selected with the arrow keys.
Define a
Comment
characterizing the plot e.g.
FSC
Select
X-axis
channel and
Y-axis
channel in dot plots
or
X-axis
channel only for histograms
Switch between
Lin
and
Log
scale
for
X
and
Y
axis and change the
Z
axis
(scaling)
Define an
Erosion level
for dots to be displayed (z-axis
level), e.g. an
Erosion level
of 2 shows only dots
representing 3 and more signals
Select Dotplot
(DP)-Mode
(Color Mode, Contour Mode or Color + Contour Mode)
Select histogram resolution as
BitRange
,
(values 16bit to 12bit)
Select CR
– Mode to show “All events” or “Regions
only”
Confirm all modifications by pressing
Accept
