Sysmac OMRON NA Series, User Manual

Page: 71 / 182

3 - 11
3 Installation and Wiring
NA-series Programmable Terminal Hardware User’s Manual (V117)
3-4
W
irin
g
Meth
od
s
3
3-
4-1 Pow
er Supply Wiring
Use the following procedure to connect the power supply.
1
Remove the sheath from the power supply wires.
2
Remove the power supply connector from the NA Unit and loosen the terminal block screws.
3
Insert the wires all the way to the back of the connector and then turn the screws clockwise to
secure the wires.
Use a small flat-blade screwdriver and tighten the screws to between 0.5 and 0.6 N·m.
4
Attach the power supply connector to the NA Unit.
Wiring Procedure
7 mm
0 V
+24 V
Power line