Sysmac OMRON NA Series, User Manual

Page: 51 / 182

2 - 5
2 Configuration Units
NA-series Programmable Terminal Hardware User’s Manual (V117)
2-
1 NA U
n
it
s
2
2-
1-1 C
omponent
s and F
unction
s
Precautions for Safe Use
Confirm the safety of the system before turning ON or OFF the power supply, or pressing the
reset switch.
 Battery
The following Battery is provided as a standard feature.
 Power Supply Connector Pin Arrangement
No. Name Description
(a) Battery cover Open this cover to replace the Battery.
(b) ID information label You can check the ID information of the NA Unit.
(c)
Expansion Unit connector
*1
For future expansion (Connector not included with product lot No. 01818
or later.)
(d) SD Memory Card connector Insert an SD Memory Card here.
(e) Ethernet port 1 Connect a device other than the Sysmac Studio.
Ethernet port 2 Connect mainly the Sysmac Studio.
(f)
Serial port
*1
For future expansion.
(g) USB host port Connect a USB memory, keyboard, mouse, or other device.
(h) USB slave port Connect the Sysmac Studio or other devices.
(i) Reset switch Use this switch to reset the NA Unit.
(j) DC input terminals These are the power supply terminals. Connect the accessory power
supply connector and supply power.
(k) Battery connector Connect the connector on the backup Battery here.
(l)
DIP switch
*1
*1. The DIP switch, Expansion Unit connector, and serial port are for future expansion.
Use for system recovery. (The DIP switch is on a PCB that is accessed
by opening the Battery cover.) At all other times, keep the dip switches in
their factory default state.
(m) Battery This is the battery to backup the clock information in the NA Unit.
Model Appearance Specifications
CJ1W-BAT01 Effective life (i.e., maximum life expectancy): 5 years
The following data is retained during power interruptions.
• Time data
Pin No. Signal name Name
1 +24 V +24-V input
2 0 V 0 V
3 FG Functional ground
Pin No. 1 2 3