Synway Information Engineering Co., Ltd
SMG-D Series Analog Gateway User Manual (Version 2.0.0)
Page 51
configurations on the interface directly, and then click
Save
to save the above settings into the
gateway or click
Reset
to restore the configurations.
3.10.3 Network
A gateway has two LANs which can be respectively configured with network type and IP address
on the network settings interface. Network Type has three options: Static, DHCP and PPPoE.
IPv4 and IPv6 address configurations are supported. If PPPoE is used, it is necessary to enter the
username and the password of the network.
After configuration, click
Save
to save the above settings into the gateway or click
Reset
to
restore the configurations. After changing the IP address, you shall log in the gateway again using
your new IP address.
3.10.4 Upgrade
On the upgrade interface you can upgrade the WEB, gateway service, kernel and firmware to new
versions. Select the upgrade package “*.tar.gz” (The gateway will do MD5 verification before
upgrading and will not start to upgrade until it passes the verification.) via
Browse…
and click
Update
.
Then the file uploading interface will appear. See Figure 3-17.
Figure 3-17 File Uploading Interface
After a successful uploading of the file, the gateway will start to upgrade the system. See Figure
3-18 and you can learn the detailed upgrading information from the upgrade information box at
the bottom.
