Synway Information Engineering Co., Ltd
SMG-D Series Analog Gateway User Manual (Version 2.0.0)
Page 40
Time Limit on Total
Calls
Sets whether to enable the time limit on all calls at the port.
Timing Cycle
Sets the time count cycle for the port.
Clear
Sets the time node to clear the time count.
Set Spent Call Time
Sets the spent call time length of the port.
SIP Code Reply
Once the spent call time reaches the total time limit, the FXO port will not be able to
make outgoing calls and the gateway will reply the designated SIP code to the IP
side.
Time Limit per Day
Set the maximum length of calls per day for this port.
Apply to Other Ports
Sets whether to apply above settings to other ports or port groups.
Click
Modify
to save the settings into the gateway, click
Return
to cancel the settings.
3.7.4 FXO List Timer
The FXO List Timer interface displays the index information of the FXO port in timing. Click the
Setting
button on the top right corner to set the timer. Click the
Add New
button at the bottom to
add the list timing rule.
The table below explains the configuration items on the interface:
Item
Description
Rule Index
The index of timing rule, used for the FXO port in list timing.
Set Spent Call Time
The length of the time already used in this rule.
Import Number
Import the matching numbers.
Number Matching
Rule
There are two number matching modes:
Prefix Matching
and
Whole Words only
.
Max Call Time
The maximum call time in this rule
Timing Cycle
The timing cycle in this rule
Clear
The time to clear the timer within the timing cycle in this rule
Click
Save
to save the settings into the gateway; click
Reset
to restore the configurations; click
Return
to cancel the settings.
3.7.5 Port Group
Figure 3-11 Port Group Settings Interface
See Figure 3-11 for the port group settings interface. A port group is a set containing single or
multiple ports, used to specify such properties as
Port Selection
and
Authentication Mode
for
all the ports in it. A new port group can be added by the
Add New
button on the bottom right
corner of the above list. Note that a port which has been occupied by one port group cannot be
chosen by others.
The table below explains the items on the interface.
Item
Description
