Synway SMG-D Series User Manual Download Page 16

Page: 16 / 70

Synway Information Engineering Co., Ltd

SMG-D Series Analog Gateway User Manual (Version 2.0.0)

Page 11

3.2 Operation Info

Operation Info includes four parts:

System Info

Channel State

Call Count

and

SIP Message

Count

, showing the current running status of the gateway.

3.2.1 System Info

On the system info interface, you can click

Refresh

to obtain the latest system information. The

table below explains the items on the interface.

Item

Description

MAC Address

MAC address of LAN.

IP Address

The three parameters from left to right are IP address, subnet mask and default

gateway of LAN.

DNS Server

DNS server address of LAN.

Receive Packets

The amount of receive packets after the gateway‟s startup, including three options:

All, Error and Drop.

Transmit Packets

The amount of transmit packets after the gateway‟s startup, including three options:

All, Error and Drop.

Current Speed

Show the current speed of data receiving and transmitting.

Work Mode

Show the work mode of the network, including four modes: 10 Mbps Half Duplex, 10

Mbps Full Duplex, 100 Mbps Half Duplex, 100 Mbps Full Duplex.

Runtime

Time of the gateway keeping running normally after startup, which will be

automatically updated.

WEB

Current version of the WEB interface.

Gateway

Current version of the gateway service.

Serial Num

Unique serial number of an SMG-D analog gateway.

U-boot

Current version of Uboot.

Kernel

Current version of the system kernel on the gateway.

Firmware

Current version of the firmware on the gateway.

Product Type

The type of current analog gateway.

3.2.2 Channel State

The channel state interface shows the channel type, the voltage and the channel state for each
channel on the gateway. The table below explains the items on the interface.

Item

Description

Channel

Channel number on the device.

Type

Type of the channel on the device. If this item shows ---, it means this channel is

unavailable, that is, the corresponding module to this channel is not inserted or

damaged.

Number

The number corresponding to the port.

Voltage

Line voltage on the channel, calculated by volt (V).

State

Displays the channel state in real time. You can move the mouse onto the channel

state icon for detailed state information.

Summary of Contents for SMG-D Series







































































Search results

Summary of Contents for SMG-D Series

Reviews:

Related manuals for SMG-D Series

Brands by name

Popular brands

Synway SMG-D Series, User Manual

Search results

Summary of Contents for SMG-D Series

Reviews:

Related manuals for SMG-D Series

Brands by name

Popular brands