Synway Information Engineering Co., Ltd
SMG-D Series Analog Gateway User Manual (Version 2.0.0)
Page 63
consistent with that of the server.)
<ca>
-----BEGIN CERTIFICATE-----
Note: Fill in the key copied from the file of ca.crt.
-----END CERTIFICATE-----
</ca>
<cert>
-----BEGIN CERTIFICATE-----
Note: Fill in the key copied from the file of client.crt, that is, the content inbetween
“-----BEGIN CERTIFICATE-----” and “-----ENDCERTIFICATE-----”
-----END CERTIFICATE-----
</cert>
<key>
-----BEGIN RSA PRIVATE KEY-----
Note: Fill in the key copied from the file of client.key
-----END RSA PRIVATE KEY-----
</key>
Note: The following key is not necessary to add if it is never encrypted at the server.
<tls-auth>
Note: Fill in the key copied from the file of ta.key
</tls-auth>
Make sure the three key files ca.crt, client.crt and client.key are of the newest versions.
Step 3:
Save the file after your examination or supplement and upload it to the device. Note that
the suffix of the file must be .conf.
Part 3: Attentions
a)
After the VPN featured is opened at the server, use your PCs to connect as a test. If two PCs
can PING through each other, it means the server works normally.
b)
Make sure the server is OK and the configuration file is ready before opening the VPN feature.
The system time of the analog gateway must be consistent with that of the server, or the
connection may sometimes fails.
