Synway Information Engineering Co., Ltd
SMG-D Series Analog Gateway User Manual (Version 2.0.0)
Page 7
The gateway allows two FXS ports to call each other by default. Just use a station connected with
an FXS port to dial the number of the destination FXS port and you can make a Tel
Tel call. The
default number of an FXS port is 80XX, among which XX represents the corresponding port
number. For example, the default number corresponding to Port 1 is 8001, and that corresponding
to Port 32 is 8032.
Actually a Tel
Tel call on the gateway is accomplished via the routing of Tel
IP
IP
Tel. For
detailed introductions and configuration guide, refer to
Situation 2: Call from a station to an IP phone (Tel
IP)
1. Go to „Advanced Settings
Dialing Rule‟ on the WEB interface and click the „Add New‟
button to add a new dialing rule. Refer to
for detailed instructions. Enter either a
particular number or a string of „x‟s to represent several random numbers. For example, „xxx‟
denotes 3 random numbers. You may use the default value of „Index‟ and are required not to
leave „Description‟ empty.
Example:
Set
Index
to
99
, fill in
Description
with
test
and configure
Dial Rule
to
123
.
2. Go to „Port Settings
Port Group‟ on the WEB interface and click the „Add New‟ button to
create a new port group and add FXS ports which are connected with stations to it. Refer to
for detailed instructions. You may use the default values of other configuration
items and are required not to leave „Description‟ empty.
Example:
Provided the FXS port which is connected with a station is Port1, check the
checkbox before
Port1
, set
Index
to
1
, fill in
Description
with
test
, and keep the default
values of other configuration items.
3. Go to „Route Settings
Tel
IP‟ on the WEB interface and click the „Add New‟ button to add
a new routing rule. Refer to
for detailed instructions. Select the port group created in
Step2 as „Source Port Group‟ and fill in „Destination IP‟ and „Destination Port‟ with the IP
address and the Port number you plan to call. You may use the default values of other
configuration items and are required not to leave „Description‟ empty.
Example:
Provided the remote IP address intended to call is 192.168.0.111 and the port is
5060. Set
Index
to
63
,
Source Port Group
to
1
, fill in
Description
with
test
, configure
Destination IP
to
192.168.0.111
,
Destination Port
to
5060
, and keep the default values of
other configuration items.
4. Pick up the station and dial the number set in Step1 to ring the remote IP phone. If you have
set a particular number in Step 1, only this number you can dial; if you have set a string of „x‟s,
how many „x‟s there are, how many random numbers you can dial.
Example:
Pick up the station and dial 123. Then the IP phone with the IP address
192.168.0.111 and the port 5060 will ring.
Situation 3: Call from an IP phone to a station (IP
Tel)
1. Go to „Port Settings
Port Group‟ on the WEB interface and click the „Add New‟ button to
create a new port group and add FXS ports which are connected with stations to it. Refer to
for detailed instructions. You may use the default values of other configuration
items and are required not to leave „Description‟ empty.
Example:
Provided the FXS port which is connected with a station is Port1, check the
checkbox before
Port1
, set
Index
to
1
, fill in
Description
with
test
, and keep the default
values of other configuration items.
2. Go to „Route Settings
IP
Tel‟ on the WEB interface and click the „Add New‟ button to add
a new routing rule. Refer to
for detailed instructions. Fill in „Source IP‟ with the IP
address which initiates the call and select the port group created in Step1 as „Destination Port
Group‟. You may use the default values of other configuration items and required not to leave
„Description‟ empty.
Example:
Provided the IP address of the IP phone which initiates the call is 192.168.0.111.
Set
Index
to
63
,
Destination Port Group
to
1
, fill in
Description
with
test
, configure
Source
