Synway Information Engineering Co., Ltd
SMG-D Series Analog Gateway User Manual (Version 2.0.0)
Page 52
Figure 3-18 System Upgrading Interface
Note that clicking
Reset
can only delete the selected update file but not cancel the operation of
Update
.
Note:
Please contact our technicians if you need to downgrade the gateway to an old version. An
improper operation may cause unexpected problems.
3.10.5 Signaling Capture
See the Signaling Capture interface. Packet capture contains Signaling Packet Capture and RTP
Packet Capture. You can select either of them to start the capture according to your requirement.
Click
Start
to start capturing packets. Click
Stop
to stop the capture and download the captured
packets.
On the Debug & Record interface, you can select a channel and the recording mode to start the
data recording. Click
Start
to start the corresponding recording. Click
Stop
to stop the recording
and download the recorded file.
3.10.6 Call Log
On the Call Log interface, click the checkbox before
Enable Call Log
to enable the call log
feature, including
Call Log
and
SIP Log
.
Call from IP Channel
displays the call log information
generated on all IP channels, and
Call from Port
displays the call log information generated on
the port you select. All the SIP related information will be displayed in
SIP Log
.