Symbol SE 923, Integration Manual

Page: 219 / 238

B-7
Miscellaneous Code Information
• Bar codes within a range of lengths
• Any length of bar codes.
Table B-4 lists the requirements for each option.
Setting Prefixes and Suffixes Via Serial Commands
To append a prefix and suffixes to the decode data:
1. Set the Scan Data Transmission Format (parameter 0xE2) to the desired option.
2. Enter the required value(s) for Prefix (0x69), Suffix1 (0x68) or Suffix2 (0x6A) using
the hex values for the desired ASCII value from Table B-5 .
Table B-4. Setting Variable Code Lengths
Code length option L1 value L2 value
One discrete length will be decoded Discrete length to decode 0x00
Two discrete lengths will be decoded Higher length value Lower length value
Lengths within a range will be decoded Lower length value Higher length value
Any length bar code will be decoded 0x00 0x00
Table B-5. Character Equivalents
Scan Value Hex Value
Full ASCII Code
39 Encode Char.
Keystroke
1000 00h %U CTRL 2
1001 01h $A CTRL A
1002 02h $B CTRL B
1003 03h $C CTRL C
1004 04h $D CTRL D
1005 05h $E CTRL E
1006 06h $F CTRL F
1007 07h $G CTRL G
1008 08h $H CTRL H