Symbol SE 923, Integration Manual

Page: 53 / 238

5-1
Chapter 5 Parameter Menus
This chapter describes the programmable parameters, provides bar codes for programming,
and hexadecimal equivalents for host download programming.
Operational Parameters
The SE-923 is shipped with the default settings shown in Table 5-1 on page 5-2. These default
values are stored in non-volatile memory and are preserved even when the scanner is powered
down.
You can change the default values by:
•
Scanning the appropriate bar codes included in this chapter. These new values
replace the standard default values in memory. The default parameter values can be
recalled by scanning the
SET ALL DEFAULTS bar code on page 5-8.
or
•
Downloading data through the scan engine’s serial port. Hexadecimal parameter
numbers are shown in this chapter below the parameter title, and options are shown
in parenthesis beneath the accompanying bar codes. Detailed instructions for
changing parameters using this method are found in Chapter 6,
Simple Serial
Interface .