Symbol PDT 3400 Series, Product Reference Manual, Page: 33 / 146

3-3
Installing the Hardware
Desk Mounting the CRD 3400
To mount the CRD 3400 on a desk:
1. Feed the communications and power cables through the back housing’s opening.
2. Plug the DB-25 cable connector into the cradle’s communications port.
3. Plug the power supply jack in the cradle’s power port.
Figure 3-2. Connecting Communications Cable and Power Cord
4. Slide the cradle’s front housing over the hook at the top of the back housing.
Figure 3-3. Installing Front and Back Housing
5. Press the front housing against the snaps in the back housing’s base to secure.
6. Connect the cables to the host as described in Connecting the Cradle(s) to the Host.
7. Connect the cable to another cradle in a chain as directed in Connecting the CRD
3400 to Other Cradle Chains.
Power Supply Communications Cable
Hook
Front Housing Back Housing
Snaps