Page
9
of
26
2. Replacement Procedures – Hard Disk Drives (HDDs) –
Using BIOS Level RAID Utility (continued)
Step 5
Slide the drive tray containing the installed 2 SSDs into the system until it clicks into place.
Step 6
Connect the other end of the power cable to the two hard disk drives (B).
Note: The solid state drives line up with the screw holes either way. It is possible for the drives to be
installed In either of two 180 degree opposite orientations. Be sure to orient the solid state drives with the
SATA connectors towards the rear with the blue latch.
