Page
6
of
26
2. Replacement Procedures – Hard Disk Drives (HDDs) –
Using BIOS Level RAID Utility
2.1 RAID 1 – Replacing Internal SATA hard drives installed in the Flex Bay
Determine which HDD has failed – BIOS Level Raid Utility - When the 9750 is booting up, the server
displays the Status of the RAID 1 array and which member drive has failed. If a drive has failed then the
Status of the RAID will normally show as :
Degraded
.
NOTE
: These 2 hard drives utilize the onboard SATA port and
the onboard RAID controller for a software RAID.
2 Hard Drives
and Status
shown by
