Page
15
of
26
5. Replacement Procedures – Add In Cards
Replacing Other PCI Add In Cards:
Step 1
PCI add-in cards are NOT hot-swappable. Before removing or replacing the riser card, you must
first take the device out of service, turn off all peripheral devices connected to the system, turn off the
system by pressing the power button, and unplug the AC power cord from the system or wall outlet.
Be sure that all devices are off and all programs on all devices are not running. If you disconnect any
devices while programs are running, data loss may occur.
Step 2
Remove chassis screw and Lid.
Step 3
Label and Remove any external connections from the defective card installed in the Riser cage.
Step 4
Remove PCI Riser Cage Assembly.
Step 5
Remove screw that holds the defective card into the Riser. Remove the card.
Step 6
Install Replacement cards (if any) into the same slot in the Riser and install screw to secure it in
its slot.
Step 7
Reinstall the Riser Cage.
Step 8
Reinstall the chassis cover and screw.
Step 9
Reconnect all external cable connections to their proper ports on the replacement card.
