Symantec NetBackup 5000, Routine Maintenance

Page: 33 / 53

BackupStore 5000
Routine Maintenance 4 Guide to the Routine Maintenance On the Management
Software
Issue 01 (2010-03-26) Symantec Corporation 4-7
Parameter Description
Status The operational state of the disk.
 Online indicates that the disk is a member disk of a RAID group
and operating normally.

Hotspare indicates that the disk is a hot spare disk.

Rebuild indicates that the disk is being reconstructed.
 Unconfigured(good) indicates that the disk is not a member disk
of a RAID group and is operating normally.
Capacity The disk capacity. Unit: GB .
Type
The physical type of the disk. The type of disks in the NetBackup
5000 is
SATA .
Enclosure ID The ID of the enclosure in which the disk is.
Exception Handling

If Slot Number of a present disk cannot be found in the interface, refer to Detecting
Only Part of Disks in the NetBackup 5000 Troubleshooting .

If a disk is in the Rebuild state, contact the technical support engineers if the disk does
not return to Online.
4.4 Check the RAID Group State
This section describes how to check the RAID group state on the system monitoring interface.
By checking the RAID group state, you can know whether the RAID group works normally.
Impact on the System
None.
Reference Standard
The normal state of a RAID Group is Optimal .
Procedure
Step 1
Log in to the system monitoring interface. For the detailed procedure, see 5.1 Logging In to
the System Monitoring Interface .
Step 2
Expand the node in the navigation tree, and then click RAID , as shown in Figure 4-7 .