Symantec NetBackup 5000, Routine Maintenance

Page: 30 / 53

4 Guide to the Routine Maintenance On the Management
Software BackupStore 5000
Routine Maintenance
4-4 Symantec Corporation Issue 01 (2010-03-26)
4.2 Checking the CPU State
This section describes how to check the CPU state on the system monitoring interface. By
checking the state of the CPU, you can know whether the CPU works normally.
Impact on the System
None.
Reference Standard
If the CPU is in the Presence detected state, it indicates that the CPU is running normally.
Procedure
Step 1
Log in to the system monitoring interface. For the detailed procedure, see 5.1 Logging In to
the System Monitoring Interface .
Step 2
Expand the node in the navigation tree, and then click CPU , as shown in Figure 4-3 .
Figure 4-3 CPU option
Step 3
View the CPU state, as shown in Figure 4-4 . Table 4-3 lists the parameter description.
ID-x indicates CPU x (the value of x is 1 or 2 ).