3 Guide to the On-Site Routine Maintenance of the
Device
BackupStore 5000
Routine Maintenance
3-8
Symantec Corporation
Issue 01 (2010-03-26)
−
If the disk online indicator is red, see
Detecting Only Part of Disks
in the
NetBackup
5000 Troubleshooting
.
−
If the disk online indicator is off, reinsert the disk module.
If the fault persists after the disk module is reinserted, replace the disk module.
If the fault persists after the disk module is replaced, contact technical support
engineers.
Power running/alarm indicator
−
If the power running/alarm indicator is orange and blinking, see
PEM Alarm
in the
NetBackup 5000 Troubleshooting
.
−
If the power running/alarm indicator is off, reinsert the PEM.
If the fault persists after the PEM is reinserted, replace the PEM.
If the fault persists after the PEM is replaced, contact technical support engineers.
Fan running/alarm indicator
−
If the fan running/alarm indicator is red, see
Fan Running/Alarm Indicator On and
Red
in the
NetBackup 5000 Troubleshooting
.
−
If the fan running/alarm indicator is off, reinsert the fan module.
If the fault persists after the fan module is reinserted, replace the fan module.
If the fault persists after the fan module is replaced, contact technical support
engineers.
Link indicator of the management network port
If the link indicator of the management network port is off, reinsert the network cable.
If the fault persists after the network cable is reinserted, replace the network cable.
If the fault persists after the network cable is replaced, contact technical support
engineers.
Link indicator of the service network port
If the link indicator of the service network port is off, reinsert the network cable.
If the fault persists after the network cable is reinserted, replace the network cable.
If the fault persists after the network cable is replaced, contact technical support
engineers.
