Symantec 10744983 - Mail Security 8320, Administration Manual

Page: 92 / 249

3
Click the End Users tab.
4 Check Enable end user settings for this group.
5
If desired, check Create Personal Allowed and Blocked Senders Lists.
6
If desired, check Specify language settings.
7
Click Save.
Allowing or blocking email based on language
Using the language identification offered by Symantec Mail Security, you can
block or allow messages written in specified languages for a group. For example,
you can choose to only allow English and Spanish messages, or block messages
in English and Spanish and allow messages in all other languages.
Note: If the Language tab in the Edit Group page is inaccessible, the Symantec
Outlook Spam Plug-in has been enabled. To disable support for the Outlook Plug-in
and enable support for built-in language identification, set Language Identification
to No on the Spam Settings page. That will make the Language tab accessible.
See “Choosing language identification type ” on page 61.
To allow or block email based on language for a group
1
In the Control Center, click Policies > Group Policies.
2
On the Group Policies page, click the group for which you want to select
compliance policies.
3
Click the Language tab.
4
Click the desired setting.
5 If you chose Only receive mail in the following languages or Do not receive
mail in the following languages, check the box for each desired language.
6
Click Save.
The language identification technology employed by Symantec Mail Security
to identify the language of a message is not foolproof. Note that messages
identified to be in a disallowed language are deleted.
Managing Group Policies
The Group Policy management options let you do the following:
Configuring email filtering
Managing Group Policies
92