Symantec 10744983 - Mail Security 8320, Administration Manual

Page: 46 / 249

Starting and stopping replication
You may occasionally need to start or stop replication manually.
Start or stop replication
Start and stop replication using the following procedures.
To start a manual replication cycle
1
In the Control Center, click Status > Scanner Replication.
2
Click Replicate Now.
To stop a replication in progress
1
In the Control Center, click Status > Scanner Replication.
2
Click Cancel Replication.
Replication status information
When LDAP data is replicated from the Control Center to one or more Scanners,
status information is generated and displayed via the Status interface in Symantec
Mail Security.
To view replication status information
■
In the Control Center, click Status > Scanner Replication.
The following information is displayed:
Description Item
Status can indicate any of the following states:
■
Idle – Nothing is happening.
■ Started – A replication request has been issued.
■
Cancelled – Either the replication was cancelled manually
by clicking Status > LDAP Synchronization > Cancel
Synchronization, or an LDAP synchronization was in
progress when a scheduled or manual replication was
initiated.
■
In Progress – A replication request has been acknowledged
by the Control Center and the process is under way.
■ Success – The replication has completed successfully.
■
Failed – The replication has failed. Consult your logs to
identify possible causes.
Status
The time at which the most recent replication began. Started
Configuring system settings
Replicating data to Scanners
46