Symantec 10744983 - Mail Security 8320, Administration Manual

Page: 30 / 249

Provides settings for outbound mail characteristics. In this area,
you can provide the following information:
■ Outbound mail IP address – Specifies the IP address on which
outbound messages are sent. You can ping this address by
pressing Test.
■
Outbound mail SMTP port – Specifies the port on which
outbound mail is sent, typically port 25.
■
Accept TLS encryption – Indicates if TLS encryption is
accepted. Check the box to accept encrypted information.
You must have a certificate defined for MTA TLS certificate
in Settings > Certificates to accept TLS encryption.
■ Certificate – Specifies an available certificate for TLS
encryption.
■ Accept outbound mail connections from the following IP
addresses and domains – Only the addresses entered in the
checked IP Address/Domains box are accepted. Click Add to
add an entry or Remove to delete one. If you specify one or
more IP addresses, you must include the IP address of the
Control Center so that Spam Quarantine and Suspect Virus
Quarantine can release messages. After you add the first
entry, the IP address of the Control Center is added
automatically and selected. If you are using a different IP
address for the Control Center, or have the Control Center
and Scanner installed on different machines, you must add
the new IP address and disable the one that was added
automatically.
■ Relay non-local domain mail to – Specifies how outbound
SMTP message relaying is routed. By default, MX Lookup is
used. Click Add to add an entry.
Outbound Mail
Settings*
Indicates that, when saved, all settings on this page are applied
immediately to all hosts.
Apply above
settings to all hosts
Provides for inbound, outbound and delivery advanced settings.
See “Configuring Default SMTP Settings” on page 31.
Advanced Settings
(*) Classless InterDomain Routing (CIDR) is supported for inbound and
outbound mail connection IP addresses.
6
Click Save to store your changes.
Configuring system settings
Configuring host (Scanner) settings
30