Symantec 10744983 - Mail Security 8320, Administration Manual

Page: 44 / 249

Information about synchronization activity.
Status can indicate any of the following states:
■ Idle – Nothing is happening.
■
Starting – The status during a one-minute delay between saving
an LDAP synchronization source and initiation of
synchronization.
■ Cancelled – The status after synchronization or replication is
manually cancelled by clicking Status > LDAP sychronization
> Cancel or Status > Replication > Cancel. This status is also
indicated if a scheduled LDAP synchronization interrupts a
replication in progress or a scheduled replication interrupts an
LDAP synchronization in progress.
■ In Progress – A synchronization request has been acknowledged
by the synchronization server and the process is under way.
■
Success –The synchronization has completed successfully.
■ Failed –The synchronization has failed. Consult your logs to
identify possible causes.
Status
The time at which the most recent synchronization began. Started
The time at which the most recent synchronization finished. Ended
The number of directory entries read from the synchronization
server. For a full synchronization, this number is equal to the total
number of records from the LDAP source.
Read
The number of directory entries added from the synchronization
server to the Control Center.
Added
The number of records modified in the Control Center based on
synchronization server information.
Modified
The number of entries deleted from the Control Center based on
synchronization server information.
Deleted
Configuring system settings
Configuring LDAP settings
44