Symantec 10744983 - Mail Security 8320, Administration Manual

Page: 47 / 249

Description Item
The time at which the most recent replication finished. Ended
The number of bytes of replicated data. Size
Troubleshooting replication
Replication will not complete until at least one LDAP synchronization source is
available and synchronization has completed successfully. Until this happens,
there is no data that replication can use to update Scanners.
Troubleshoot replication
The following techniques can help you troubleshoot replication problems.
Basic troubleshooting procedure
1 Verify that synchronization has occurred.
2
If a successful synchronization has occurred, check your replication status
and take one or more of the actions described below.
To verify that synchronization has completed successfully
1
In the Control Center, click Status > LDAP Synchronization.
2
Check the Status column for a Success message.
See “Synchronization status information” on page 43. for additional
information about synchronization status.
To check replication status
1
In the Control Center, click Status > Scanner Replication.
2
Check the Status column for each attached and enabled Scanner on the list.
See
“Replication status information” on page 46. for additional information
about replication status.
47 Configuring system settings
Replicating data to Scanners