a) Programming regular user transponders
You can program up to 990 user PIN codes using the keypad. To
do so, assign the ID numbers from 0 to 989.
The length of the user PIN codes can vary from 4 to 6 digits.
Four digits is the minimum length. You can program codes from
0001 to 999999.
The code 1234 cannot be assigned. This code is
reserved for a special function (linking transponders
with user PIN codes).
General information:
• Users can be assigned a specific user ID (a number from
.... to , without “0” at the beginning).
• User transponders can also be added without a user ID.
This speeds up the adding process, but has potential
disadvantages.
• If no specific user ID is provided when adding a transponder,
the code lock will automatically assign the next available user
ID. However, it is not then possible to determine which ID
was assigned.
If you do not assign a specific user ID to a user and
enter it in a list, this can make subsequent programming
more difficult.
If an employee leaves the company or loses a user
transponder, you will not know which user ID to delete,
and the user PIN code or transponder will not be
available for deletion!
25
Summary of Contents for 2299889
Page 307: ......
