• When the guest ID has been deleted, the code lock will beep
and the LED indicator (2) will briefly turn green. The LED
indicator (2) will then turn yellow again.
If the guest ID cannot be found in the code lock
memory, the code lock will emit 3 short beeps and the
LED indicator (2) will flash red before switching back to
yellow.
• You can now delete other guest IDs/transponders.
• To end the deletion process and exit programming mode,
press the key. The LED indicator (2) will switch to constant
red to indicate that the code lock is in standby mode.
c) Selecting the access mode
There are a number of ways to activate the relay of the code lock:
The code lock can be set to three access modes.
The selected access mode determines how the lock is opened.
For more information, refer to section 15 "a) Activating the relay
(opening and closing the lock)"
Switching the relay via the transponder or user PIN code
(default setting)
Hold a user transponder (1) over the keypad. If the transponder is
valid, the relay will be switched.
or
Enter a user PIN code via the keypad (1). If the user PIN code is
valid, the relay will be switched.
44
Summary of Contents for 2299889
Page 307: ......
