• Enter a user ID (a number from to
).
• Press the key to confirm the user ID. The LED indicator (2)
will briefly turn green, and then yellow again.
• Hold a user transponder over the keypad (1). The code lock
will beep when the user transponder has been detected. The
LED indicator will briefly flash green.
• Remove the user transponder from the keypad.
• The LED indicator (2) will then turn yellow again.
• The new transponder will be associated with the manually
assigned user ID.
A previously added transponder cannot be assigned
again to another user ID.
If a user ID was selected which is already saved to a
user transponder, the code lock will emit 3 short beeps
and the LED indicator (2) will flash red before switching
back to yellow. If this occurs, repeat the adding process
again.
• You can now add another user transponder. To add another
transponder, repeat the above process.
• Press the key. The LED indicator (2) will turn yellow. The
code lock is now in add transponder mode.
• Enter a user ID (a number from to
).
• Press the key to confirm the user ID. The LED indicator (2)
will briefly turn green, and then yellow again.
• Hold the next transponder in front of the device and proceed
as described above.
28
Summary of Contents for 2299889
Page 307: ......
