9. Operation
a) Code lock
• After completing the installation and connection process,
switch on the operating voltage.
• The code lock will emit a short beep. The LED indicator on the
top of the code lock will be bright red.
10. Programming
a) General information
Program the code lock at the installation location/
before mounting to reduce the installation time.
Do not disconnect the code lock from the power supply during
programming. This may result in memory errors and corrupt the
existing data/settings. Note the following important information:
• The master code is required to enter programming mode. By
default, the master code is "123456".
• Each user can be assigned a specific user ID (this is a
number from 0 to 989, without "0" at the beginning). The
adding and saving of transponders or user PIN codes is also
possible without entering a user ID (the code lock assigns
it automatically). In this case, however, a specific user can
only be deleted if their user PIN code or transponder is still
available.
19
Summary of Contents for 2299889
Page 307: ......
