c) Changing the master code
• The code lock must be in standby mode and the LED
indicator (2) must be red.
• Enable programming mode (see section 10 "Programming",
paragraph "b) Enabling/exiting programming mode"). The
LED indicator (2) will then flash red.
Example: (factory setting)
• Press the key. The LED indicator (2) will turn yellow.
• Enter the new master code,
e.g.:
The master code must always be 4 to 6 digits.
• Press the key to confirm your entry. Enter the new master
code again to confirm:
• Press the key to confirm your entry. The LED indicator (2)
will briefly light up green to confirm your entry before flashing
red.
• Press the key to exit programming mode. The LED
indicator (2) will switch to constant red to indicate that the
code lock is in standby mode.
22
Summary of Contents for 2299889
Page 307: ......
