Parameter setting
Page 32/55
SYCLOPE TERE’O Touch XL
®
Installation, starting, and programming instructions
3)
Programming menu « Installer »
The installer programming menu allows the general programming of your
TERE’O Touch
®
controller.
To open the programming menu, press the menu button for 3 seconds. When the message
"INSTALLER" appears, you can release the button.
When the "MENU" button is released, the general programming screen appears. You must then,
depending on the need, choose the programming to be done.
If the Installer Password (cf. § VI.3.b «
Language, Time et code
») is enabled then you will
be asked to do so before you can access the INSTALLER menu. When prompted for a
password, you can enter « 0000 » to access the service window.
This is valid from version 4.02.
The programming screen closes automatically after 60 seconds without action.
INSTALLER
MENU
Configuration
Language - Time
Screen
Dosing relay
Temperature
Test mode
Initialization
TEREO TOUCH XL
Version :
4.00
Serial number :
170100001
Communications
Maintenance
Contact & Relay
Configuration
Language - Time - Code
Screen
Test mode
Dosing relay
Initialization
TEREO TOUCH XL
Version :
4.02
Serial number :
170100001
Maintenance
Contact & Relay
Temperature
Communications
Lower
version at 4.02
Upper
version at 4.02
Configuration
Language - Time - Code
Screen
Test mode
Dosing relay
Initialization
TEREO TOUCH XL
Version :
4.02
Serial number :
170100001
Maintenance
Contact & Relay
Temperature
Communications