Installation and connections
Page 21/55
SYCLOPE TERE’O Touch XL
®
Installation, starting, and programming instructions
c)
Chlorine or Bromine input
Preferably use a two-strand cable.
Wire a strand on
Iin2(+) (8)
.
Wire the other strand on
Iin2(-) (9).
Tighten the cable gland to seal.
NOTE: Be careful to respect the polarity of the sensor.
d)
Power input
When necessary, it’s possible to use chlorine or bromine sensor requiring external power.
Preferably use a two-strand cable.
Connect the (+) strand to the
Vref (10)
.
Connect the (-) strand to the
Com (11).
Tighten the cable gland to seal.
Power channel Iin2
Chlorine / Bromine sensor