General use
Page 26/55
SYCLOPE TERE’O Touch XL
®
Installation, starting, and programming instructions
V.
General use
The
SYCLOPE TERE’O Touch
®
controller is intended to measurement and to control parameters for
water treatment of swimming pools. The installation of
SYCLOPE TERE’O Touch
®
equipment is based
on the principle of measuring and regulating the filtration circuit.
This type of installation is recommended in the event of single swimming pool where
filtration circuit is independent.
Water is sampled after the recirculating pumps and before the filter entry. (If using,
before flocculent injection circuit).
The sensors installed into the measuring chamber receive water to be analysed and
send the values to the controller.
According to the setting points fixed by the user, the controller sends proportional
orders to the pumps installed into the main intake line of the swimming pool.
Swimming pool
Controller
Measuring probe housing
Sampling
circuit
Buffer tank
Pump
Heater
Waste
Filter