SWM VAREZ 125, Manual, Operation, Maintenance, Page: 90 / 261

EN -
38
SINGLE REAR SHOCK ABSORBER SPRING
PRELOAD ADJUSTMENT
The single rear shock absorber (1) spring preload can be
adjusted; to make the adjustment, operate as follows:
-
clean lock ring nut (2) and adjusting ring nut (3) of
the spring;
-
either with a hook wrench or an aluminium punch,
loosen the lock ring nut;
-
turn the adjuster ring nut as required;
-
when the adjusting operation is over - according to
your weight and riding style - tighten the lock ring
nut.
WARNING
Be careful not to touch hot exhaust pipe
while adjusting the shock absorber.
FORK FUNCTIONALITY CHECK
To check proper operation of front fork, operate as
follows:
-
get on the motorcycle;
-
pull the front brake lever and forcefully push the
handlebar downwards a few times to check that the
fork extends and compresses correctly;
-
if you notice oil leaks and jamming, have it checked
by an SWM dealer;
STEERING BEARING CHECK
Place the motorcycle on a stand in vertical position and
secure it so that it cannot overturn.
-
stand in front of the motorcycle;
-
firmly hold the lower part of the sheaths of both
fork legs and move the fork forward and backward
checking that there is no play.
WARNING
If you feel any play during the movement,
have proper tightening of the steering
bearings checked by an SWM dealer.