SWM VAREZ 125, Manual, Operation, Maintenance, Page: 77 / 261

EN -
25
EN
STARTING THE ENGINE
After getting on the motorcycle as described in the
relative paragraph, operate as follows to start the
engine:
-
Place ignition key (1) to position (the buzz that you
hear when you turn the key to this position is caused
by the fuel pump which puts the feeding system
under pressure);
-
pull the clutch lever (2);
-
shift gear pedal (3) to neutral position then release
the clutch control level;
-
check that the button (4) is in position and then
press the start button (5). When a cold engine has
just been started, do not increase revs, to ensure an
adequate oil warm-up and circulation in all points
that require lubrication.
Note
A safety switch is fitted on the clutch lever support.
This switch allows you to start the engine only
with gearbox in neutral position, or with the gear
engaged and the clutch lever pulled.
With the stand lowered, the bike can only be started
with the gear in neutral.