SWM VAREZ 125, Manual, Operation, Maintenance, Page: 65 / 261

EN -
13
EN
Clock Settings
-
Press the “Set” key (1) until “CLOCK” appears.
-
Press the “Set” key (1) and hold it for more than 3
seconds until the hours flash on the display.
-
Press the “Set” key (1) and set the hour; to confirm
settings, press the “Set” key (1) and hold for more
than 3 seconds until the tenths of minutes flash on
the display.
-
Press the “Set” key (1) and set the tenths of minutes;
to confirm settings, press the “Set” key (1) and hold
for more than 3 seconds until the minutes flash on
the display.
-
Press the “Set” key (1) and set the minutes; to confirm
settings and exit settings, press the “Set” key (1) and
hold it for more than 3 seconds.
TRIP Setting
-
Press the “Set” key (1) until “TRIP” appears and then
press the button (1) for more than 3 seconds to reset
the value and restart the count from 0 km or miles.
Setting the Unit of Measurement
-
The unit of measurement must be set with the
motorcycle stopped and key in the ON position. Press
the “Set” key (1) until “ODO” appears and then press
the button (1) for more than 3 seconds to switch from
km to miles or vice versa.
Error Messages
-
In the event of a fault, the relevant error code is
displayed on the display (1); contact the closest SWM
dealer to check the fault.
Operate as shown for the following error codes.