Swift Group Select 122 2020, Owner'S Handbook Manual

Page: 79 / 154

78
Time, Date & Day
Press the (+) or (-) buttons above or below each item to
adjust the value. Note that the system uses the 24 hour
clock.
Screen settings
Press on the screen brightness button to adjust the screen
backlight level. Press on the screen timeout button to select
the time that the screen will stay illuminated for after a press
or touch.
Bluetooth Pair
Press the pair button to start pairing with your compatible
Bluetooth device. The pair button border will illuminate when
pairing is active. You can now pair your device to the system
following the devices instructions. Pairing remains active for
1 minute and is then turned off automatically.
Bluetooth Delete
Press the delete button to delete any Bluetooth pairings
from the system.
Key Beep
Use the key beep button to turn on / off the beep sound
when a button is pressed.
SWIF T COMMAND
POWER CONTROL SYSTEM
2.18 Bluetooth Pairing & Other Controls
The EC800 control panel can display the
software version number of the Control Panel,
the PSU and the communicator / tracking unit.
Press the settings button to view the setting
screen which contains the related information.
The Bluetooth pairing process is covered
below. Further help with Bluetooth pairing
is available in the form of a help video which
can be viewed on the Sargent website in the
Support Information section.
General settings screen
Here you can set the date & time, screen
brightness and screen on time.
Note : Setting changes are saved when you
press the home button to return to the main
screen.
ELEC
TR
IC
AL S
YS
TEMS
Fridge Screen. Here you can select the operating mode, set the cooling setting and view the
temperature status.
Mode Press mode button to select the required operating
mode. select off to turn the fridge off.
Setting Use the setting (+) or (-) buttond to increase or decrease
the cooling setting. 1 is low and 5 is maximum
Temperature The temperature status display shows the temperature
state of the fridge, with the optimal (central) position
being the ideal. If the fridge is too warm, incease the
cooling setting to reduce the temperature. If the fridge is
too cold, reduce the cooling setting accordingly.
Note that the fridge will take time to react to a seting change so please allow sufficient time for
the status to update after changing a setting or adding food.
2.17 EC800 Refrigerator Controls
The main refrigerator settings can be set / controlled by the EC800 control panel or the Swift
Command app. These controls work in parallel with the ones on the fridge control panel, so the
settings cab be changed by either method.
The related control anel sceens are shown below.
For information in using the fridge from the Swift Command app, please see the Swift Command
User Guide.