77
Truma CP+ Energy
Note
: Changes made on the EC800 control
panel may not be accepted on the heating
controller immediately if the controller has
been recently used and still has its backlight
on. Please try to use one controller at a time.
Heating timer screen
On the heating screen press the more button
(right arrow) to set or view the daily heating
timers.
2.16 Air-conditioning
If your vehicle has been fitted with a compatible
air-conditioning unit then the settings can be
set / controlled by the EC800 control panel, the
air-conditioner infrared remote control or the
Swift Command app.
The unit must be turned on with its power
switch before it can be controlled. The related
control panel screens are shown below. For
information in using the airconditioning from
the Swift Command app, please see the Swift
Command User Guide.
Air-conditioning screen
Here you can select the operating mode, set
the target temperature and adjust the fan
speed.
Truma CP+ Energy
The energy, gas or electric setting will vary depending on
the appliance type.
For Truma Combi+ heating press the energy button to
step through the available settings. Gas is indicated by the
flame symbol and electric indicated by the lightning symbol.
Possible combinations are GAS, MIX1, MIX2, EL1 or EL2.
One electric symbol=1KW and two=2KW.
Timer
Press on the hour or minute value to change the setting.
Timers should be set in order during the day (Timer 1 the
earliest and Timer 4 the latest) and use the 24 hour clock.
Temperature
Press the temperature values to change the setting. Each
press will increment the value from Off, then 5 degrees
through to 30 degrees Celsius.
Water
Press the water values to change the setting. Each press will
step through the available setting, which vary by appliance
type.
For Truma CP+ available settings are Off, Eco or Hot.
For Alde 3020 available settings are Off, Normal or Boost.
For Whale available settings are Off or On
SWIF T COMMAND
POWER CONTROL SYSTEM
Lights
Press the lights button to control the LED light built into the
air-conditioning unit. Select on or off to turn the light on or
off, or select dimmed to allow the light to be controlled with
other dimmable lighting in the vehicle.
Mode
Press mode button to select the required operating mode.
Select off to turn the airconditioner off. Note that available
modes vary according to the model of air-conditioner fitted.
Temperature
Use the temperature setting (+) or (-) buttons to increase or
decrease the temperature setting. Available settings range
from 5 degrees to 30 degrees Celsius.
Fan Speed
Use the fan speed setting (+) or (-) buttons to increase or
decrease the fan setting.
Note that available settings vary according to the model of
air-conditioner fitted.
ELEC
TR
IC
AL S
YS
TEMS
Summary of Contents for Select 122 2020
