Swegon bluMartin freeAir 100, Manual

Page: 35 / 60

Installation
– Bare Brickwork Set
33 [ I ]
Condensate Drain
– Aluminium Composite Pipe
For laying in the screed, or as a continuation line or collecting line, the direct connection to an
aluminium composite pipe with insulation is ideal.
1. Install them frost-free, ensure the roof ventilation and
provide a siphon as an odor trap prior to discharge into the
sewage pipe.
VDMI.0002: Adaptor condensate hose

pipe
VDTP.0050: Alu composite pipe

16 mm
VDMI.0010: Adaptor pipe

DN32
2. It also lends itself to the use of our preformed siphon.
WARNING
Drive height A must be significantly larger than
obstacle height B be.
VDMI.0015: Condensate set siphon with separating agent
VDTP.0050: Alu composite pipe

16 mm
VDMI.0010: Adaptor pipe

DN32
3. Even if yourself have formed a siphon with the aluminium
pipe (minimum height 5 cm), during the subsequent
installation of the freeAir 100, fill the separating agent and
some water as an odor trap into the pipe.
This is repeated with the annual service.
FA00.7010: Siphon separating agent - concentrate syringe
B
A
B
A
A