Swegon bluMartin freeAir 100, Manual

Page: 40 / 60

Installation
– Bare Brickwork Set
38 [ I ]
10. Attach extension for the separating plate at the outer
position, in case existing wall thickness (including stucco)
is between 49 cm and 53 cm
Note
You will need additional telescopic adapter extensions for
wall thicknesses of over 53 cm. The part number is
FA00.2003.
49 - 53 cm
11. When installing the metal outside air divider make sure
that the metal lip of the outside air divider seals properly
against the interior air stream divider.
12. The metal outside air divider is attached to the
telescoping adapter via 6 metal screws.
ATTENTION
The upper edge of the metal sheet must be waterproof
connected to the plaster.
If the plaster is rough, it must be additionally sealed with
a suitable sealant.