Installation
– Bare Brickwork Set
29
[ I ]
7.
After the wall cut-out is completed install the electrical
cable (3 x 1.5 mm
2
) in the upper part of the wall box. Affix
the wall box flush with plaster,
perpendicularly
and secure
with wedges.
8.
Please note that different stucco thicknesses result when
matching wall curvature.
WARNING
• The wall box must be placed with millimeter
accuracy, so the freeAir 100 will fit tightly sealed.
• Leading edge of the wall box must sit
flush with
plaster
.
• Use sealing tape to assure a vapor proof connection
between wall box and wall.
9.
Use appropriate polyurethane foam to fasten corners of
wall box.
Once the foam has hardened add additional layers of
foam.
Take care not to allow expanding foam to deform the box.
Leave box bracing in place!
Summary of Contents for bluMartin freeAir 100
