61
Click for contents
Device: S.M.A.R.T. (8 channel model)
Whole Evaluation not passed, continue to use the disk:
If for some reason
the hard drive has developed a fault (such as one or more bad sectors), you
can instruct your NVR to continue saving to the drive.
Self-check Type:
There are three types available:
Conveyance:
This is a very quick test that verifies the mechanical parts of the
hard drive are working.
Short:
This test verifies major components of the hard drive such as read/
write heads, electronics and internal memory.
Long:
This is a longer test that verifies the above as well as performing a
surface scan to reveal problematic areas (if any) and forces bad sector relo-
cation.
When performing a test, your NVR will continue to work as normal.
In most circumstances, the information here will not be needed for general
use of your NVR, however one of our Swann Helpdesk & Technical Support
staff may ask you to access this if you call for assistance.
This function can be used to
display technical information
on the hard drive installed
inside your NVR. You can
also perform a test (there
are three types available) to
evaluate and detect potential
drive errors.
·
Don’t forget to click “Save”
to apply settings.
·
Click the “Close” button to
exit the Main Menu.
