37
Click for contents
Capture: Capture
Channel:
Select a camera that you would like to edit.
Auto Capture:
When enabled, your NVR will take a snapshot each time an
event occurs.
Stream Mode:
Leave the default selection. This will save each snapshot at
the camera’s native resolution.
Normal Interval:
The length of time that must elapse before a snapshot is
taken. For example, when setting a Normal capture schedule, a snapshot
will be taken every 5 seconds using the default selection. Adjust accordingly.
Alarm Interval:
When setting a Motion capture schedule, a snapshot will be
taken each time motion has been detected according to the interval selected.
Adjust accordingly.
Manual Capture:
Enable this feature if you would like to manually take a
snapshot using the Manual Capture button on the camera toolbar.
As this is an added feature, a capture schedule is not enabled by default. To
enable this (see page 38 – Capture: Schedule).
Please note:
The Capture Schedule, Normal Interval and Alarm Interval
options are not available on the 4 channel model. Snapshots will be au-
tomatically taken when enabled.
·
Don’t forget to click “Save”
to apply settings.
·
Use the “Copy” function to
apply all settings to the other
cameras.
·
Click the “Default” button to
revert back to default settings.
·
Click the “Close” button to
exit the Main Menu.
As an added feature, you can
enable and set a schedule for
your NVR to take a snapshot
each time an event occurs.
This is particularly useful for
finding motion events quickly
and can also be used for dif-
ferent purposes such as time
lapse photography.
