36
Click for contents
Record: Schedule
Channel:
Select a camera that you would like to edit.
Normal:
Your NVR will constantly record for a set period of time.
Motion:
Your NVR will only record when motion has been detected from one
or more cameras.
Alarm:
Your NVR will only record if one or more alarm sensors (connected to
the alarm inputs on your NVR) have been triggered.
Each square represents 30 minutes. Using the mouse, select the desired re-
cording mode then click on a particular square to change or click and drag
the mouse over the squares corresponding to your desired time period. The
same action can also be applied if Normal, Motion or Alarm recording is not
required (on one or more sections that have recording enabled).
In the above example, a Motion recording schedule has been created for
12:00 a.m. to 06:00 p.m. and a Normal recording schedule for 06:00 p.m. to
12:00 a.m. Sunday to Saturday.
To search for and play previous Normal, Motion and Alarm recordings (see
page 40 - Search: General).
·
Don’t forget to click “Save”
to apply settings.
·
Use the “Copy” function to
apply all settings to the other
cameras.
·
Click the “Default” button to
revert back to default settings.
·
Click the “Close” button to
exit the Main Menu.
By default, a Motion schedule
has been enabled for each
camera connected, however
you can change the sched-
ule to suit your needs. The
schedule is presented as a
24-hour 7 days a week grid
and is color coded to repre-
sent the event type.
