12
Click for contents
Display: Live
Channel:
Select a camera that you would like to edit.
Channel Name:
Enter a name for the camera you’ve selected. It can be up to
eight characters in length.
Show Name:
Leave this enabled to display the camera name in Live View
mode, otherwise click the drop down menu to disable.
Record Time:
It’s recommended to leave this enabled, as a timestamp will
be embedded on all video recordings. This allows you to easily identify when
events have occurred. You can disable this if you wish.
Date Format:
Select a preferred display format (this is independent to the
date format selected for the NVR itself).
Time Format:
Select a preferred display format (this is independent to the
time format selected for the NVR itself).
Refresh Rate:
This setting correlates to the “Video Format” selection in the
Startup Wizard. When selecting “NTSC”, 60Hz will be displayed. When se-
lecting “PAL”, 50Hz will be displayed.
OSD Position:
Allows you to change the position of the on-screen display on
the Live View screen. Click the “Setup” button then use the mouse to reposi-
tion. Right-click the mouse then click “Save”.
Color:
Click the “Setup” button to access the image adjustment tools:
Channel:
Select a camera that you would like to edit.
Hue:
This changes the color mix of the image.
(continued on next page)
·
Don’t forget to click “Save”
to apply settings.
·
Click the “Close” button to
exit the Main Menu.
The configuration options
available allow you to name
each camera relevant to
where it has been installed
as well as the ability to ad-
just image settings such as
brightness and contrast. You
can also change how the
date and time format are dis-
played in Live View mode.
