AMI CACE
Program List and Explanations
A-96.250.871 / 120417
51
2.2.2
Miscellaneous
:
2.2.2.1
Case Temp:
Shows the current temperature in [°C] inside the trans-
mitter.
2.2.3
EDI
:
2.2.3.1
Actual current:
Current in mA applied to the EDI module.
Actual voltage:
Resulting voltage in mV.
Total current:
Amount of electric charge in Ah since the last ex-
change of the EDI module.
Total flow:
Amount of sample water in L since the last exchange of
the EDI module.
Last exchange:
Date of the last exchange.
2.3 Sample
2.3.1
Sample ID
:
Shows the identification assigned to a sample. This
identification is defined by the user to identify the location of the
sample.
2.3.2
Sample Flow
: Shows the current sample flow in l/h and the Raw
Value in Hz.
The Sample flow must be above 2.5 l/h.
2.3.3
Sample Temp:
2.3.3.1
Temp 1:
Shows the current sample temperature at sensor 1 in °C.
(Pt 1000)
: Shows the current temperature at sensor 1 in Ohm.
Temp 2:
Shows the current temperature at sensor 2 in °C.
(Pt 1000)
: Shows the current temperature at sensor 2 in Ohm.
2.4 I/O State
Shows current status of all in- and outputs.
2.4.1/2.4.2
2.5 Interface
Only available if optional interface is installed.
Review programmed communication settings.
Alarm Relay:
Active or inactive.
Relay 1/2:
Active or inactive.
Input:
Open or closed.
Signal Output 1/2:
Actual current in mA
Signal Output 3:
(optional)
Actual current in mA
Summary of Contents for AMI CACE
Page 1: ...AMI CACE Version 6 20 and higher A 96 250 871 120417 Operator s Manual...
Page 79: ...AMI CACE Index A 96 250 871 120417 77 Terminals 20 22 23 26 U USB Interface 27 W Wire 18...
Page 80: ...78 A 96 250 871 120417 AMI CACE Notes 12 Notes...
